Tag Archives: Well files

Bring It On Sooner & Keep It Lifting Longer. Solutions To Consider For ESPs (Or Any Field Equipment)

Leave a reply

Settled on average 6,000 feet below the surface, electrical submersible pumps (a.k.a ESPs) provide artificial lift for liquid hydrocarbons for more than 130,000 wells worldwide.
Installing the correct ESP system for the well, installing it precisely, and careful monitoring of the system is paramount to reducing the risk of a premature end to an ESP life cycle. But the increasingly long laterals of horizontal wells, along with rapid drilling in remote areas, is creating challenges for efficient operations and the ESP’s life span. Implementing the correct processes and data strategies will, undoubtedly, be the cheapest and fastest way to overcome some of the challenges.

1- Implement A Process Flow That Works, Break The Barriers

When a decision is made to install an ESP in a well, a series of actions are triggered: preparing specifications, arranging for power, ordering equipment, scheduling operations, testing, and finally installing it in a well, to state a few. These actions and decisions involve individuals from multiple departments within an organization as well as external vendors and contractors. These series of actions form a process flow that is sometimes inefficient and is drawn out, causing delays in producing revenue. In addition, sometimes processes fall short causing premature pump failures that interrupt production and raise operational costs.
Research of many industry processes shows communication challenges are one of the root causes for delays, according to LMA Consulting Group Inc. Furthermore, communication challenges increase exponentially when actions change hands and departments. A good workflow will cut across departmental barriers to focus on the ultimate goal of making sure Engineering, Procurement, Logistics, accounting, vendors, contractors and field operations all are on the same page and have a simple and direct means to communicate effectively. But more importantly, the workflow will allow for the team to share the same level of urgency and keep stakeholders well informed with the correct information about their projects. If you are still relying on phones, papers and emails to communicate, look for workflow technology that will bring all parties on one page.

A well-thought through workflow coupled with fit-for-purpose technology and data is critical, not only to ensure consistent successful results each time but also to minimize delays in revenue.

2- ESP Rented Or Purchased, It Does Not Matter… QA/QC Should Be Part Of Your Process

Although ESPs are rented and the vendor will switch out non-performing ones, ensuring that the right ESP is being installed for a well should be an important step of the operator’s process and procedures. Skipping this step means operators will incur the cost of shut downs and tempering of reservoir conditions that may otherwise be stabilized – not to mention exposure to risks each time a well is penetrated.
More importantly a thoughtful workflow ensures a safe and optimal life span for ESPs regardless of the engineers or vendors involved, especially in this age of a mass retiring of knowledge.

At today’s oil prices, interrupted production for a well of 1,000 barrels per day will cost an operator at least $250,000 of delayed revenue for a 5 day operation. Predictive and prescriptive analytics in addition to efficient processes can keep the interruption to the minimum if not delay it altogether.

3- Know Why And How It Failed Then Improve Your Processes – You Need The Data And The Knowledge

One last point in this blog: Because ESPs consist of several components, a motor, a pump, a cable, elastomer, etc… ESP failure can, therefore, be electrical, mechanical, thermal or fluid/gas composition. Capturing and understanding the reasons for a failure in a system to allow for effective data analysis provides insight that can be carried forward to future wells and to monitoring systems. Integrating this knowledge into systems such as predictive analysis or even prescriptive analytic to guide new engineers will have an effect on operator’s bottom-line. A few vendors in the market offer these kind of technology, weaving the right technology, data and processes to work in synergy is where the future is.

On how to implement these solutions please contact our team at info@certisinc.com.

Related articles

Cut Search Time for Critical Documents from Days to Seconds. It is Time to Stop Digging in Folder Structures

Leave a reply

It wasn’t long ago when geoscientists and petroleum engineers at one renowned oil company might spend days searching for documents.  “Searching” meant digging through folders (as many as 1500 of them!!), and discerning whether a “found” file was an official report or only an earlier draft.  To give you an idea, some critical HSE documents were buried as deeply as within the 13th   sub-folder (and then the correct version had to be selected!!)

Obviously in this situation emergency and critical decision cycle times were lengthened by the difficulty of finding the “buried” technical documents. The average time to locate and validate the accuracy of a document was calculated at 3 days.

When Certis arrived, the company’s folder system looked like an episode of “Hoarders”. The hoarder believes there is an organized system to his “madness”, but nobody else in the home can quite figure it out. Over the years, over 2,000,000 documents had been amassed at this location, and that total was growing fast. As engineers and geoscientists floated in and out, the system fell victim to hundreds of interpretations. Unlike the hoarder’s goods, these documents contained vital information that accumulated years of studies and billions of dollars of data acquisitions. Years of knowledge, buried, literally.

In today’s competitive and fast pace operations in our Oil and Gas industry, data is accumulating faster than ever and decisions must be made faster than ever by petro-professionals that are already overextended.  Compounded with the fact that a large portion of the knowledge is within a workforce that may soon retire means that Oil and Gas companies that want to stay exceptional and competitive cannot afford to waste petro-professionals time hunting for critical records.

So, how do you get to a point where your organization can locate the right document instantly?  We believe it is all about Processes, Technology and People put in place (a cliché but so true)

When Certis completed this project, the technical community could locate their documents within few seconds using “google-like” search. More importantly they were (and are now) able to locate the “latest” version and trust it. The solution had to address 3 elements, people, processes and technology.

The final solution meant collapsing folders from 2000 down to 150, using a DRM system without burdening the technical community and implementing complete processes with a service element that ensured sustainability.

Centralized, standardized and institutionalized systems and processes were configured to take full advantage of the taxonomy and DRM systems. Once the ease of use and the value were demonstrated to the people, buy-in was easy to get.

Technology advances faster than our ability to keep up. This is especially true when working with professionals whose focus is (and should be!) on their projects, not on data management. We had to break the fear of change by proving there is a better way to work that increases efficiency and makes employee’s lives easier.

Legacy Documents, what do you do with them?

Because solving operational issues at the field requires access to complete historical information, exhuming technical legacy documents, physical or electronic, from their buried locations was the next task.

On this project the work involved prioritizing, locating, removing duplicates, clustering, and tagging files with standard meta-data. With a huge number of files accumulated in network drives and library rooms, a company must keep an eye on “cost/ benefit” ratio. How to prioritize and how to tag technical files become two key success factors to designing a cost-effective migration project.

This topic can go on and on since there were so many details that made this project successful. But that may be for another post.

Read more about Certis and about our oil and gas DRM services http://ow.ly/oRQ5f