Tag Archives: Knowledge management

Data and Processes are your two friends in fat or skinny margin times – Some tools and ideas to weather low oil-prices

Leave a reply

well;  2014 is ending with oil prices down and an upward trend on M&A activities. For those that are nearing retirement age, this is not all bad news. For those of us that are still building our careers and companies, well, we have uncertain times ahead of us. This got me asking: is it a double whammy to have most knowledgeable staff retiring when oil prices are low? I think it is.

At the very least, companies will no longer have the “fat margins” to forgive errors or to sweep costly mistakes under the rug! While costs must be watched closely, with the right experience some costs can be avoided all together. This experience is about to retire.

For those E&P companies that have already invested (or are investing) in putting in place, the right data and processes that captured knowledge into their analysis and opportunity prioritization, will be better equipped to weather low prices.  On the other hand, companies that have been making money “despite themselves” will be living on their savings hoping to weather the storm. If the storm stays too long or is too strong they will not survive.

Controlling cost the right way

Blanket cost cutting, across all projects is not good business. For example some wells do not withstand shutting down or differing repairs, you would risk losing the wells altogether. Selectively prioritizing capital and operational costs with higher margins and controllable risks, however, is good business. To support this good business practice is a robust foundation of systems, processes and data practices that empower a company to watch important matrices and act fast!

We also argue that without relevant experience some opportunities may not be recognized or fully realized.

Here are some good tools to weather these low prices:

Note that this is a quick list of things that you can do “NOW” for just few tens or few hundred thousand dollars (rather than the million dollar projects that may not be agile at these times)

  •  If you do not have this already, consider implementing a system that will give you a 360 degree view of your operations and capital projects. Systems like these need to have the capability to bring data from various data systems, including spreadsheets. We love the OVS solutions (http://ovsgroup.com/ ). It is lean, comes with good processes right out of the box and can be implanted to get you up and running within 90 days.
  • When integrating systems you may need some data cleaning. Don’t let that deter you; in less than few weeks you can get some data cleaned. Companies like us, Certisinc.com, will take thousands of records validate, de-duplicate, correct errors, complete what is missing and give you a pristine set. So consider outsourcing data cleaning efforts. By outsourcing you can have 20 maybe 40 data admins to go through thousands of records in a matter of a few days.
  • Weave the about-to-retire knowledge into your processes before it is too late. Basically understand their workflow and decision making process, take what is good, and implement it into systems, processes and automated workflows. It takes a bit of time to discover them and put them in place. But now is the time to do it. Examples are: ESP surveillance, Well failure diagnosis, identifying sweet frac’ing spots…etc. There are thousands upon thousands of workflows that can be implemented to forge almost error proof procedures for  “new-on-the job” staff
  • Many of your resources are retiring, consider hiring retirees, but if they would rather be on the beach than sitting around the office after 35+ years of work; then leverage systems like OGmentorsTM (http://youtu.be/9nlI6tU9asc ).

In short, the importance of timely and efficient access to right & complete data, and the right knowledge weaved into systems and processes are just as important, if not more important, during skinny margin times.

Good luck. I wish you all Happy Holidays and a Happy 2015.

Change Coming Our Way, Prepare Data Systems to Store Lateral’s Details.

Leave a reply

Effectively, during the past decade, oil and gas companies have aimed their spotlight on efficiency. But should this efficiency be at the expense of data collection? Many companies are now realizing that it shouldn’t.

Consider the increasingly important re-fracturing effort.  It turns out, in at least one area, that only 45% of re-fracs were considered successful if the candidates were selected using production data alone.  However, if additional information (such as detailed completion, production, well integrity and reservoir characterization data) were also used a success rate of 80% was observed. See the snip below from the Society of Petroleum Engineer’s paper “SPE 134330” by M.C Vincent 2010).

Capture

Prepare data systems to store details, otherwise left in files.

Measurements while drilling (MWD), mud log – cuttings analysis and granular frac data are some of the data that can be collected without changing drilling or completion operations workflow and the achieved efficiency.  This information when acquired at the field will make its way to petrophysicists and engineers. Most likely it ends up in reports, folders and project databases.  Many companies do not think of this data storage beyond that.

We argue, however, to take advantage of this opportunity archival databases should also be expanded to store this information in a structured manner. This information should also funnel its way to various analytical tools. This practice will allow technical experts to dive straight into analyzing the wells  data instead of diverting a large portion of their time in looking for and piecing data together. Selecting the best re-frac candidates in a field will require the above well data and then some. Many companies are starting to study those opportunities.

Good data practices to consider

To maximize economic success from re-stimulation (or from first stimulation for that matter) consider these steps that are often overlooked:

  1. Prepare archival databases to specifically capture and retain data from lateral portions of wells. This data may include cuttings analysis, Mud log analysis, rock mechanics analysis, rock properties, granular frac data, and well integrity data.
  2. Don’t stop at archiving the data, but expose it to engineers and readily accessible to statistical and Artificial Intelligence tools. One of those tools is Tibco Spotfire.
  3. Integrate, integrate, integrate. Engineers depend on ALL data sources; internal, partners, third party, latest researches and media, to find new correlations and possibilities. Analytic platforms that can bring together a variety of data sources and types should be made available. Consider Big Data Platforms.
  4. Clean, complete and accurate data will integrate well. If you are not there yet, get a company that will clean data for you.

Quality and granular well data is the cornerstone to increasing re-frac success in horizontal wells and in other processes as well.  Collecting data and managing it well, even if you do not need it immediately, is an exercise of discipline but it is also a strategic decision that must be made and committed to from top down. Whether you are drilling to “flip” or you are developing for a long term. Data is your asset.

 

Capture The Retiring Knowledge

Leave a reply

The massive knowledge that is retiring and about to retire in the next five years will bring some companies to a new low in productivity. The U.S. Bureau of Labor Statistics reported that 60% of job openings from 2010 to 2020 across all industries will result from retirees leaving the workforce, and it’s estimated that up to half of the current oil & gas workforce could retire in the next five to ten years.

For companies that do not have their processes defined and weaved into their everyday culture and systems — relying on their engineers and geoscientists knowledge instead — retirement of these professionals will cause a ‘brain drain,’ potentially costing these companies real down time and real money.

One way to minimize the impact of “Brain Drain” is by documenting a company’s unique technical processes and weaving them into training programs and, where possible, into automating technology. Why are process flows important to document? Process flow maps and documents are the geographical maps that give new employees the direction and the transparency they need, not only to ramp up a learning curve faster, but also to repeat the success that experienced resources deliver with their eyes closed.

For example, if a reservoir engineer decides to commission a transient test, equipment must be transported to location, the well is shut down and penetrated, pressure buildup is measured, data is interpreted, and BHP is extrapolated and Kh is calculated.
The above transient test process, if well mapped, would consist of: 1) Decisions 2) Tasks/ Activities 3) A Sequence Flow 4) Responsible and Accountable Parties 5) Clear Input and Output 6) and Possible Reference Materials and Safety Rules. These process components, when well documented and defined, allow a relatively new engineer to easily run the operation from start to end without downtime.

When documenting this knowledge, some of the rules will make its way in contracts and sometimes in technology enablers, such as software and workflow applications. The retiring knowledge can easily be weaved into the rules, reference materials, the sequence flow, and in information systems.

Documenting technical processes is one of the tools to minimize the impact of a retiring workforce. Another equally important way to capture and preserve knowledge is to ensure that data in personal network drives is accumulated, merged with mainstream information, and put in context early enough for the retiring workforce to verify its accuracy before they leave.

Processes and data  for a company make the foundation of a competitive edge, cuts back on rework and errors, and helps for quickly identifying new opportunities.

To learn more about our services on Processes or Data contact us at info@certisinc.com

Better Capital Allocation With A Rear-View Mirror – Look Back

1 Reply

In front of you are two choices: Tie up $100 million with low return or over spend by $50 million with no reliable return. Which option do you choose? Neither is acceptable.

“It seemed we were either tying up cash and missing on other opportunities, or overspending where we should not have in the first place,” said a former officer of a US independent. “We heard great stories at presentations from engineers and geoscientists as they were painting the picture to executives to fund their programs. But at the end of the year, the growth was never where we had expected it to be.”

Passing by poor investments through better allocation of capital greatly enhances company performance. To achieve this, executives needed a system to look back and evaluate what each asset team had predicted compared to the actual performance of the asset. They needed a look-back system where hindsight is always 20/20.

A look-back system is beneficial not only for better capital allocation, but also to identify and understand the reasons for low or high performance of an investment.

Implementing a look-back system is data intensive. The data needed, however, typically has already been collected and stored as part of everyday operations. For example most companies have an AFE system that captures predicted economics of well projects. All companies keep system(s) to capture production volumes and accounting data for both revenue and costs.  Data for evaluating an investment after-the-fact is already available – for the most part.  The reason executives did not have a look-back system was buried in their processes. In how each asset’s economic returns are calculated and allocated.

Here are few tips to consider when implementing a look-back system for an oil and gas company:

  • Start with the end. Identify the performance indicators (KPI) required to measure assets’ performance.
  • Standardize how economics are prepared by each asset team. Only then will you be able to compare apples to apples.
  • Allocate costs and revenue back to each well. Granularity matters and is key. With granularity, mistakes of lumping costs under a wrong category can be avoided and easily rectified.
  • Missing information for the KPI’s? Introduce processes to capture and enter data in company’s systems (historically this information may be in presentation slides and personal spreadsheets).
  • If well information is scattered across systems, data integration will be needed. Well, AFE, Production, Reserves, and Accounting data will need to be correlated.
  • Automate the generation of information to executives. Engineers and geoscientist should not have to prepare reports at the end of each month or quarter to management. Their time is FAR better spent making money and assets work harder for their investors.
  • Know it is a change to the culture. Leadership support must be behind the initiative and well communicated throughout the stake holders.

“Once we implemented a look-back system, we funded successful teams more and reduced the budget from under performing assets, then we utilized the freed money to grow. We were a better company all around” – Former Officer of a Large Independent.

Bring It On Sooner & Keep It Lifting Longer. Solutions To Consider For ESPs (Or Any Field Equipment)

Leave a reply

Settled on average 6,000 feet below the surface, electrical submersible pumps (a.k.a ESPs) provide artificial lift for liquid hydrocarbons for more than 130,000 wells worldwide.
Installing the correct ESP system for the well, installing it precisely, and careful monitoring of the system is paramount to reducing the risk of a premature end to an ESP life cycle. But the increasingly long laterals of horizontal wells, along with rapid drilling in remote areas, is creating challenges for efficient operations and the ESP’s life span. Implementing the correct processes and data strategies will, undoubtedly, be the cheapest and fastest way to overcome some of the challenges.

1- Implement A Process Flow That Works, Break The Barriers

When a decision is made to install an ESP in a well, a series of actions are triggered: preparing specifications, arranging for power, ordering equipment, scheduling operations, testing, and finally installing it in a well, to state a few. These actions and decisions involve individuals from multiple departments within an organization as well as external vendors and contractors. These series of actions form a process flow that is sometimes inefficient and is drawn out, causing delays in producing revenue. In addition, sometimes processes fall short causing premature pump failures that interrupt production and raise operational costs.
Research of many industry processes shows communication challenges are one of the root causes for delays, according to LMA Consulting Group Inc. Furthermore, communication challenges increase exponentially when actions change hands and departments. A good workflow will cut across departmental barriers to focus on the ultimate goal of making sure Engineering, Procurement, Logistics, accounting, vendors, contractors and field operations all are on the same page and have a simple and direct means to communicate effectively. But more importantly, the workflow will allow for the team to share the same level of urgency and keep stakeholders well informed with the correct information about their projects. If you are still relying on phones, papers and emails to communicate, look for workflow technology that will bring all parties on one page.

A well-thought through workflow coupled with fit-for-purpose technology and data is critical, not only to ensure consistent successful results each time but also to minimize delays in revenue.

2- ESP Rented Or Purchased, It Does Not Matter… QA/QC Should Be Part Of Your Process

Although ESPs are rented and the vendor will switch out non-performing ones, ensuring that the right ESP is being installed for a well should be an important step of the operator’s process and procedures. Skipping this step means operators will incur the cost of shut downs and tempering of reservoir conditions that may otherwise be stabilized – not to mention exposure to risks each time a well is penetrated.
More importantly a thoughtful workflow ensures a safe and optimal life span for ESPs regardless of the engineers or vendors involved, especially in this age of a mass retiring of knowledge.

At today’s oil prices, interrupted production for a well of 1,000 barrels per day will cost an operator at least $250,000 of delayed revenue for a 5 day operation. Predictive and prescriptive analytics in addition to efficient processes can keep the interruption to the minimum if not delay it altogether.

3- Know Why And How It Failed Then Improve Your Processes – You Need The Data And The Knowledge

One last point in this blog: Because ESPs consist of several components, a motor, a pump, a cable, elastomer, etc… ESP failure can, therefore, be electrical, mechanical, thermal or fluid/gas composition. Capturing and understanding the reasons for a failure in a system to allow for effective data analysis provides insight that can be carried forward to future wells and to monitoring systems. Integrating this knowledge into systems such as predictive analysis or even prescriptive analytic to guide new engineers will have an effect on operator’s bottom-line. A few vendors in the market offer these kind of technology, weaving the right technology, data and processes to work in synergy is where the future is.

On how to implement these solutions please contact our team at info@certisinc.com.

Related articles

Cut Search Time for Critical Documents from Days to Seconds. It is Time to Stop Digging in Folder Structures

Leave a reply

It wasn’t long ago when geoscientists and petroleum engineers at one renowned oil company might spend days searching for documents.  “Searching” meant digging through folders (as many as 1500 of them!!), and discerning whether a “found” file was an official report or only an earlier draft.  To give you an idea, some critical HSE documents were buried as deeply as within the 13th   sub-folder (and then the correct version had to be selected!!)

Obviously in this situation emergency and critical decision cycle times were lengthened by the difficulty of finding the “buried” technical documents. The average time to locate and validate the accuracy of a document was calculated at 3 days.

When Certis arrived, the company’s folder system looked like an episode of “Hoarders”. The hoarder believes there is an organized system to his “madness”, but nobody else in the home can quite figure it out. Over the years, over 2,000,000 documents had been amassed at this location, and that total was growing fast. As engineers and geoscientists floated in and out, the system fell victim to hundreds of interpretations. Unlike the hoarder’s goods, these documents contained vital information that accumulated years of studies and billions of dollars of data acquisitions. Years of knowledge, buried, literally.

In today’s competitive and fast pace operations in our Oil and Gas industry, data is accumulating faster than ever and decisions must be made faster than ever by petro-professionals that are already overextended.  Compounded with the fact that a large portion of the knowledge is within a workforce that may soon retire means that Oil and Gas companies that want to stay exceptional and competitive cannot afford to waste petro-professionals time hunting for critical records.

So, how do you get to a point where your organization can locate the right document instantly?  We believe it is all about Processes, Technology and People put in place (a cliché but so true)

When Certis completed this project, the technical community could locate their documents within few seconds using “google-like” search. More importantly they were (and are now) able to locate the “latest” version and trust it. The solution had to address 3 elements, people, processes and technology.

The final solution meant collapsing folders from 2000 down to 150, using a DRM system without burdening the technical community and implementing complete processes with a service element that ensured sustainability.

Centralized, standardized and institutionalized systems and processes were configured to take full advantage of the taxonomy and DRM systems. Once the ease of use and the value were demonstrated to the people, buy-in was easy to get.

Technology advances faster than our ability to keep up. This is especially true when working with professionals whose focus is (and should be!) on their projects, not on data management. We had to break the fear of change by proving there is a better way to work that increases efficiency and makes employee’s lives easier.

Legacy Documents, what do you do with them?

Because solving operational issues at the field requires access to complete historical information, exhuming technical legacy documents, physical or electronic, from their buried locations was the next task.

On this project the work involved prioritizing, locating, removing duplicates, clustering, and tagging files with standard meta-data. With a huge number of files accumulated in network drives and library rooms, a company must keep an eye on “cost/ benefit” ratio. How to prioritize and how to tag technical files become two key success factors to designing a cost-effective migration project.

This topic can go on and on since there were so many details that made this project successful. But that may be for another post.

Read more about Certis and about our oil and gas DRM services http://ow.ly/oRQ5f